Categories

Hot Products

News

Welding Process Of Titanium Plate And Titanium Tube
Jan 28, 2019


    Pipe cutting and beveling; pipe cutting and beveling should be carried out in a special working place using mechanical processing methods. When processing, use non-polluting medium clean water to cool to prevent oxidation. Processing tools should be dedicated and kept clean to prevent iron contamination. The finished nozzle should ensure that the surface is flat and free of defects such as cracks and heavy skin. The maximum inclination deviation of the notch plane does not exceed 1% of the pipe diameter.


    Surface cleaning: Use a steel brush made of austenitic stainless steel to remove all the welding surfaces of the titanium plate and the scales, paint, dirt, dust and debris that can react with the titanium material within 100mm of the groove. Use a grinding wheel to trim the machined surface and remove defects such as flash, burrs, bumps and the like.


    Pairing: Align and clamp the titanium tube and fittings, the axis should not be offset, the gap is uniform, and the titanium tube should be prevented from being damaged and contaminated during assembly. Avoid forcing group pairs. The tack welding uses the same welding process as the formal welding.


    Degreasing treatment: All the welding surfaces and 50 mm in the vicinity of the groove are degreased with sulphur-free ethanol or sulfur-free acetone. The treated surface should be free of any residue.


    Titanium plate titanium tube welding equipment:


    Welder: DC dc welder is used. The welder should guarantee excellent working characteristics and adjustment characteristics, and be equipped with a good ammeter and voltmeter.


    Welding torch: QS-75°/500 water-cooled TiG welding torch is used. The torch should have a simple structure, light weight and durability, tight gun body, good insulation, stable airflow, and strong tungsten clamp, which is suitable for welding at various positions.


    Argon gas delivery tube; semi-rigid plastic tube, rubber hose and other hygroscopic materials should not be used. It should be used exclusively when used, and should not be used in combination with pipes that transport other gases. The argon tube should not be too long, so as to prevent the air pressure from being unstable due to excessive pressure drop, generally not exceeding 30m.


    Welding fixture: set of titanium plates and fittings with austenitic stainless steel or copper tube kane, locking bolts, etc. It should be ensured that the titanium plate and the fitting have a certain clamping force to ensure that the axis is consistent and the gap is even and suitable.


    Auxiliary equipment and tools: argon protective cover, polishing machine, special boring tool, stainless steel wire brush, etc.


  • QR CODE
  • facebook