Nickel Aluminum (Ni-Al) Alloy Sputtering Targets

Basic Info

Nickel aluminum (Ni-Al) Alloy Sputtering Targets
Purity: 99.9%
Composition:
Ni/Al=50/50at%
Ni/Al=70/30at%

Spec:
Diameter: 1" (25.4mm) to 18" (457.2mm), max. Single piece, Size: Length: <1500mm, Width: <127mm, Thickness: >1mm, 1500mm length for some metal and alloy sputtering target
If larger size than this, we can do it as tiles joint by 45 degree or 90 degree.
Shape: Discs, plate, rod, tube, sheet, Delta, Rotatable, fan-shaped and all sputtering targets can be produced and supplied in any types on the request of customized specification

There is a comprehensive and increasing selection of alloys available in various forms and purities.
We have only listed the more popular material. Please feel free contact us with any special requirements at any times, we will try to get back for you ASAP.

Following shape can be available:
Discs, plates, foils, rods, rings, deltas e. T. C and can be made it per drawing:
Al/Cu, Al/Cu/Fe, Al/Cr, Al/Si, Al/Sc, Al/Si/Cu, Al/ND, Al/Mo, Al/W, Al/Ti, Al/Mg, Al/Zn, Al/Ge, Au/Sn, Au/Zn, AG/Al, AG/Au, AG/Bi, AG/Cu, AG/Ti, AG/ZnO, AG/In, Cu/Al, Cu/Zr, Cu/Mg, Cu/In, Cu/In/Se, Cu/Ga, Cu/Ti, Co/Cr, Co/Fe/Si/B, Co/Fe, Cr/Al, Dy/Fe, Fe/Co, Fe/Co/Si/B, Gd/Fe, Gd/Co, Gd/Fe/Co, Ge/Al, Ge/Sb/Te, Hf/Al, Hf/Y, In/Sn, In/Zn, In/Sb, La/Ni, Mg/Al, Mg/AG, Mg/Y, Mn/ZnO, Mn/IR, Mo/Al, Mo/In, Mo/Nb, Mo/Ta, Mo/W, Mo/Si, ND/Al, Nb/Ta, Nb/Ti, Ni/Ti/Cu, Ni/Cr, Ni/Fe, Ni/V, Tb/Fe, Ti/Al, Ti/Al/Si, Ti/Al/Si/B, Ti/ND, Ti/Co, Ni/V, Ni/Al, Pr/ND, Pd/Ni, Pb/Zr/Ti, Sc/Al, Sc/Mg, Sn/Zn, Sn/In, Ta/IR, Ta/Nb, Ta/Al, Ta/B, Ta/Cr, Ta/Hf, Ta/Mo, Ta/W, Ta/V, Ta/Si, Tb/Dy/Fe, Tb/Co, Tb/Fe/Co, Ti/Al/V, Ti/Ni, Ti/Ni/B, Ti/W, Ti/Zr, V/W, W/Ti, W/Si, W/B, V/Mo, W/Mo, W/Al, W/Re, W/Ni, Y/Al, Y/Zr, Zr/Al, Zr/Ti, Zn/Al, Zn/AlN, Zn/Cu, Zn/Cu/Al, Zn/In, Zn/Fe, Zn/Mg, Zn/Mg/Cu, Zn/Sn, Zn/Sn/Sb, Zn/Ti

Product Description